Commercial Cleaning FAQ's
HARD-SURFACE FLOORS (URETHANE)
Is urethane slick when applied?
Any coated surface can be slippery when wet. We offer optional additives to create high slip resistance (lower probability of slipping) for wet environments or areas of concern. Our urethane product is considered to have limited slip resistance according to the American National Standards Institute (ANSI)/National Floor Safety Institute (NFSI) B101.3-2012 test method for measuring the wet dynamic coefficient of friction (DCOF) of common hard-surface floor materials.
Does urethane have an odor during or after the application?
Urethane finish contains no volatile organic compounds or solvents, which are often the root of the odor and even noxious fumes. It has a very light clean scent as if it were to be barely there.
CARPET CLEANING
Will carpet cleaning be disruptive to my business? Bay Area Decon Pros will schedule a time after hours or we can develop a customized program to clean your carpets one area at a time. Our technician will advise you of the time needed for drying.
Before the technician arriving for my scheduled service do I need to do anything? Yes. Remove any fragile items from the tops of furniture in the room we will be cleaning. Put away any trash cans, small paper shredders, plants, etc. from the floor in areas you want cleaned. To receive the best results with Bay Area Decon Pros cleaning, we recommend removing furniture from the rooms that we will be cleaning. Instead of moving include file cabinets, conference room tables, bookcases, lobby furniture and large pieces of furniture, we will clean around these items. Then finish by pre-vacuuming all areas that require cleaning.
After my carpets are cleaned is there anything I should know?
It’s best to allow carpets to dry for 8-10 hours before walking on them. Walking on them may flatten the fibers which will leave them to be damaged. If necessary, we can provide air movers if needed to help air circulation as this will speed up the drying time. Foot traffic should be minimized for up to 24 hours to let the product cure if a carpet protector such as Scotchgard was applied. Do not move any furniture back in place until carpet is completely dry or Scotchgard carpet protector has cured.
TILE AND GROUT
Why should I get tile and grout professionally cleaned?
Regular cleanings such as mopping, will only remove the surface-level dirt. In high traffic areas will the grout becomes darker as the dirt builds up in the crevices and becomes a brownish black color.
Is professional tile and grout cleaning expensive?
Professional tile and grout cleaning can be just pennies compared to the cost of replacing tile. Call today to get an estimate from one of our professionals.
How long does it take to get the tile and grout at my business professionally cleaned?
For a 600 square-foot area, cleaning generally takes 4-6 hours. Grout sealing itself takes two to three hours. If you choose to have the grout sealed by applying a urethane finish, we recommend waiting 24 hours after rinsing to apply sealer so it will adhere properly. All dry times will vary based on the room configuration, size of the tile and the amount of soil in the grout.
How often do I need to get my tile and grout professionally cleaned?
We recommend having your tile and grout professionally cleaned every year to keep the tile floors in your property looking their best. Depending on regular floor maintenance, soil and the amount of traffic the particular of the room.
Will there be an odor?
About an hour or so after the tile and grout is cleaned, you may notice a slight scent that will gradually fade varying based on humidity, heat and air circulation. Dryer fans are also available to speed up the drying process.
HARD-SURFACE FLOORS (URETHANE)
Is urethane slick when applied?
Any coated surface can be slippery when wet. We offer optional additives to create high slip resistance (lower probability of slipping) for wet environments or areas of concern. Our urethane product is considered to have limited slip resistance according to the American National Standards Institute (ANSI)/National Floor Safety Institute (NFSI) B101.3-2012 test method for measuring the wet dynamic coefficient of friction (DCOF) of common hard-surface floor materials.
Does urethane have an odor during or after the application?
Urethane finish contains no volatile organic compounds or solvents, which are often the root of the odor and even noxious fumes. It has a very light clean scent as if it were to be barely there.
CARPET CLEANING
Will carpet cleaning be disruptive to my business? Bay Area Decon Pros will schedule a time after hours or we can develop a customized program to clean your carpets one area at a time. Our technician will advise you of the time needed for drying.
Before the technician arriving for my scheduled service do I need to do anything? Yes. Remove any fragile items from the tops of furniture in the room we will be cleaning. Put away any trash cans, small paper shredders, plants, etc. from the floor in areas you want cleaned. To receive the best results with Bay Area Decon Pros cleaning, we recommend removing furniture from the rooms that we will be cleaning. Instead of moving include file cabinets, conference room tables, bookcases, lobby furniture and large pieces of furniture, we will clean around these items. Then finish by pre-vacuuming all areas that require cleaning.
After my carpets are cleaned is there anything I should know?
It’s best to allow carpets to dry for 8-10 hours before walking on them. Walking on them may flatten the fibers which will leave them to be damaged. If necessary, we can provide air movers if needed to help air circulation as this will speed up the drying time. Foot traffic should be minimized for up to 24 hours to let the product cure if a carpet protector such as Scotchgard was applied. Do not move any furniture back in place until carpet is completely dry or Scotchgard carpet protector has cured.
TILE AND GROUT
Why should I get tile and grout professionally cleaned?
Regular cleanings such as mopping, will only remove the surface-level dirt. In high traffic areas will the grout becomes darker as the dirt builds up in the crevices and becomes a brownish black color.
Is professional tile and grout cleaning expensive?
Professional tile and grout cleaning can be just pennies compared to the cost of replacing tile. Call today to get an estimate from one of our professionals.
How long does it take to get the tile and grout at my business professionally cleaned?
For a 600 square-foot area, cleaning generally takes 4-6 hours. Grout sealing itself takes two to three hours. If you choose to have the grout sealed by applying a urethane finish, we recommend waiting 24 hours after rinsing to apply sealer so it will adhere properly. All dry times will vary based on the room configuration, size of the tile and the amount of soil in the grout.
How often do I need to get my tile and grout professionally cleaned?
We recommend having your tile and grout professionally cleaned every year to keep the tile floors in your property looking their best. Depending on regular floor maintenance, soil and the amount of traffic the particular of the room.
Will there be an odor?
About an hour or so after the tile and grout is cleaned, you may notice a slight scent that will gradually fade varying based on humidity, heat and air circulation. Dryer fans are also available to speed up the drying process.
